Jeff Guitar is Finished!

It's been a long time in the finishing stages. But she's all finished. Well, Jeff still needs to machine or purchase some locking nuts. Or perhaps he'll find the originals in the basement somewhere. Side note for Jeff, in case I forget to tell you: The guitar is currently tuned flat. This is so you can put on the locking nuts and fine tune through the bridge. Remember you don't want the guitar "in tune" when you put the locking nuts on. :)

A word on Floyd Rose Tremolo Bridges. Wow are these suckers tough to set up! Never set one up before and let me tell you it was fun and frustrating all at the same time. I see why people think their guitars are 'broken' when they go to set up this type of bridge. If you don't know what to expect you would definitely think you were either doing something wrong or the guitar was broken somehow. A big thank you to the www.imuso.co.uk website. You provided an most valuable "How To" guide on Floyd Rose Tremolo bridges.

Anyway, as usual there were obstacles to overcome but I learned something and it was all worth it in the end. Although, I think I'm going to take a long break from guitars. I still have dreams of replacing the pick-ups and refinishing my current bass, and building a bass. But that's a project for much later.

Here is Jeff's new/old Ibanez.

Stay tuned for the Stave Drum Project that Brent and I will be working on. Currently I'm trying to build a jig/rig to build the drums. Of course it's going to be an experience and a lot of trial and error. But that's why I take on these projects ... to take my brain somewhere it hasn't been before. Now if I could just make some money on these types of projects *starts to day dream*

Okay... Upcoming events in the Rob project files.

New batch of Mead (wine made with honey). I bottled my last batch and it's starting to taste really good, but it has about 5-6 more months of aging.

I will also be submitting all 3 flavors of the mead to the wine competition at the State Fair this upcoming year also. Flavors are Blueberry, Blackberry, and Strawberry.

I've sparked Kevin's interest in mead so we are going to both make a batch soon. He wants to try to create Chocolate Raspberry. As for me I have no idea what flavor to try. Some ideas are pomegranate, orange, kiwi, pineapple, and been toying with a recipe for a french toast flavor.

The stave drum project will be starting up very soon. At this point I think I'm finished with preliminary ideas. It's time to just start putting things together and find out what's wrong or could be done a different way. The key to the jig/rig set up is keep it as simple and inexpensive as possible.

I've been getting new ideas on finishes for the drums so the experimental stave drums will give me a few mock-ups and/or "oops" drums to practice some of these finishes on. One I've been dying to try (not new by any means) is a burst. 2 bursts I really want to try is a honey into a green and a triple burst of honey into a red into a tobacco. The triple burst is old school Fender & Gibson. I've seen a lot of guys on message boards not use spray guns for the bursts they just use steel wool and sanding to get the blending. Can't wait to try it. Also want to try to make an inlay in a drum.

Alright, that's enough dreaming for today. Thanks for reading and we'll talk at you all later.

Sunday Sunday Sunday

Well, this morning I played video games until around 9:30 then headed outside to wet sand the guitar ... once again.

Yesterdays clear coat went on really well and I'm getting really good at the brush on application technique. Wet sanding was going very well until I was sanding the side portions of the guitar. I wiped the guitar to see where I was and noticed some blue on the rag. DOH! Nothing major I just had a small sand though, you can't even tell where it is. So, I decided to finish the front and back of the body with 800 grit wet then re-clear just the sides.

I should be done with body work next weekend, woo-hoo!

While I was waiting for the clear to dry I decided to work on the neck. Took apart everything and cleaned every nook and cranny in that sucker and gave the face a good buff. It looks brand new again. Even cleaned the fret board with some naphtha and a tooth brush (dirty sucker ... yuck). Then I straightened the neck and leveled and rounded the frets. After all of that I cleaned her up and put on a fresh coat of fret board finishing oil. The guitar will need some new frets in the future, but I'm confident that Jeff will get a few more years out of the existing ones ... so that's good news.

I also took apart the Floyd Rose bridge and gave everything a naphtha & 3-1 oil bath. Everything received a tooth brush cleaning and then it was all reassembled. I did this, because my original once over of the bridge made me think that I may need to replace some screws and/or parts. After the bath and the scrub down everything is in working order. A few of the set screws are corroding, but they don't need to be replaced just yet. Gives the guitar some character.

So far I only need to replace a handful of screws due to the heads are stripped. Almost couldn't get them off. The next challenge I have is that a screw head has broken off and the screw portion is still in the body. Hey now ... it was like that when I got it. I'm sure I have an article in one of my magazines on how to repair that (or at least get it out). Worst case I'll have to drill it out and fill the hole with some putty and it'll be good as new again. The hole is covered with a plate so I'm not worried about drilling it out if it comes to that.

If I remember to take in the model number of the guitar to work I'll give Ibanez a call this week to order a new back plate cover. I'm actually getting a excited to get this guitar finished so I can hear what it sounds like on Jeff's amp.

Well that's all. Nothing too exciting this weekend.

Ah ... A New Post

Yes ... I'm still alive for those of you who do check the blog still. The IT Nazi at work has made it so I cannot access my blog, I can't even post a comment on a blog. We can no longer have streaming audio or streaming video either, which is a shame becaue I highly enjoyed the AOL Sessions music. So, all we can do at work is ... well ... work. Boring!!!!

So, after working 9 hours a day on a computer. The last thing I want to do when I come home is get on a computer. But, I'll try more often to update you guys on my life's adventures.

Anyway, I have been working on Jeff's guitar the past few weeks and of course I've hit a few problems. Just once I'd like a normal project. In wet sanding some "patterns" have come through and they look like wood grain. Weird thing is that they aren't wood grain and they are smooth. Think of looking at an oak door ... but the "grain" portion is shiny and everything else is hazy from the wet sanding. Like I said ... weird. I decided to see if they would go away after a final buffing ... nope. If you turn the body and look at the reflection you can see them clearly. What are they? I wish I knew. Of course they don't show up in a picture, so I can't post them for you guys to see. I decided to keep on wet sanding to see if they would go away ... nope. Almost had a sand through, but lucky for me I caught it in time. So, off to the auto store this morning to purchase some activator and I put on another coat of clear. Hopefully this will take care of the problem and I can continue working on it tomorrow. This coat of clear went on very smooth, so I'm hoping that hardly any level wet sanding needs to take place and I can do my final buffing tomorrow afternoon.

Brent and I have been talking again about the stave shell building. But I made a deal with myself a long time ago to only have one project going at a time. The stave shell will have to wait until the guitar is finished. Shouldn't be too much longer Jeff.

Plus, I have to build the rig to make these shells anyway. I'm still in the development and research phase of that part. It could be a bit before I'm ready.

All I know about the stave shells is that Brent is dying to do a drop test on one of them to see how well the glue really holds.

Alright ... that's enough for now. The PlayStation is calling my name, the game of choice the past few months has been Final Fantasy 12. Although I wish it was just a tad warmer, I feel like riding the motorcycle today. Just a bit nippy today for that ... oh well.